Avoid contact with skin and eyes. Ensure adequate ventilation.
Apply a commercial polymer spill neutralizer or absorbent powder specifically designed for slick polymers to safely clear the residue. 5. Handling and Storage Proper Handling Avoid contact with eyes and skin. Wear appropriate personal protective equipment (PPE). Do not aerosolize or create mists in unventilated areas.
The first section of the MSDS establishes the identity of the chemical and the responsible party. Nalco Ultimer 7752 Manufacturer: Nalco Company (An Ecolab Company)
For many industrial users (especially in mining and wastewater), this section is as important as the health data. nalco ultimer 7752 msds
: Used for non-potable raw water and primary/secondary effluent clarification.
Dike the area to prevent the chemical from entering waterways or drainage systems. Pump the liquid into marked recovery containers.
: The process eliminates the need for hydrocarbon oils and surfactants, thereby preventing their release into waterways. It also reuses ammonium sulfate, a waste byproduct from nylon (caprolactam) production, as a feedstock, turning an industrial waste into a useful resource. As a result, the polymer has a lower Biological Oxygen Demand (BOD) and Chemical Oxygen Demand (COD) than traditional emulsions. Avoid contact with skin and eyes
Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Seek medical attention if irritation persists.
Waste generation should be minimized wherever possible. Nalco Ultimer 7752 must be disposed of in accordance with local, state, and federal environmental regulations. Do not flush chemical residues directly into public sewers or natural bodies of water. Disposal typically involves incineration or controlled chemical treatment at an authorized waste facility.
High concentrations of cationic or anionic polymers can be toxic to aquatic organisms (like fish and daphnia) by binding to respiratory membranes. However, when used correctly, the polymer binds to organic solids and is removed during the clarification process. Do not aerosolize or create mists in unventilated areas
When working with Nalco Ultimer 7752, the following controls are recommended:
: Protect the product from freezing. Keep containers tightly closed when not in use and maintain adequate industrial ventilation. 4. Exposure Controls and Personal Protection (PPE)
Nalco ULTIMER 7752 is a liquid water-soluble polymer used primarily in industrial wastewater treatment to enhance solid-liquid separation. Because Nalco Water (an Ecolab company) generally does not host its full SDS/MSDS library publicly, you must request the official document through their Nalco Water SDS Request Form . 🛡️ Safety Highlights (ULTIMER 7752)