Sscom V5.13.1 English Version

If you get an error when opening a port, ensure another program (like Arduino IDE or PuTTY) is not using the same COM port.

Use the function to record the telemetry directly to your hard drive for future analysis in Excel or MATLAB. Troubleshooting Common Issues 1. The COM Port Dropdown is Empty

+--------------------+ +-------------------------+ | Windows PC | USB-to-TTL | Embedded MCU Target | | [ SSCOM V5.13.1 ] | <===========> | (Arduino / ESP32 / STM) | | TX --------------> | Hardware | -------------> RX | | RX <-------------- | Interface | <------------- TX | +--------------------+ +-------------------------+ 1. Hardware Pin Configurations

Choose your required (115200 is standard for most modern microcontrollers). Step 2: Configure Serial Parameters Set the standard serial communication data frame variables: Data Bits: Typically set to 8 . Stop Bits: Typically set to 1 . Parity: Typically set to None . Step 3: Open the Port Sscom V5.13.1 English Version

One of the standout features of V5.13.1 is the multi-string panel. You can pre-configure dozens of distinct command strings and send them with a single click. Furthermore, it supports cyclic or timed automatic sending, allowing you to run stress tests or continuous polling loops without manual intervention. 4. Built-in Checksum Calculator

A baud rate mismatch between SSCOM and the embedded hardware.

Includes capabilities to upload and receive entire files through serial communication. If you get an error when opening a

The story of is one of a "no-nonsense" legacy tool that has remained a staple for hardware engineers and developers despite the emergence of newer software. It serves as a specialized serial communication port (UART) debugging tool, primarily used to send and receive data between a PC and embedded hardware like Arduino, STM32, or industrial modules. Key Features and Use Cases

Developers often use SSCOM to send directly to communication modules, such as LoRaWAN or ESP boards, to verify connectivity and signal strength. Some versions also include specialized tools like a "Picture Converter" that can turn images into binary RGB arrays for display debugging. Capacitive Soil Moisture with LoRaWAN (English)

Configuring the software requires matching your parameters exactly to the connected hardware. Serial Port Settings Parity: Typically set to None

SSCOM V5.13.1 is an advanced serial port communication debugging tool designed for Windows environments. It serves as a bridge between your computer and external hardware peripherals connected via physical serial ports, USB-to-UART bridges (such as CH340, CP2102, or FTDI chips), or virtual COM ports.

Getting started with Sscom V5.13.1 is straightforward, as it is a "green" (portable) application that requires no formal installation.

Leave them unchecked for standard text (ASCII) communication.

Send AT commands to GSM, GPRS, GPS, and Bluetooth modules.

Check (if available) or manually control the RTS pin for direction switching. Sscom’s low latency makes it feasible for Modbus RTU testing.