Fanuc Series Oitf Plus Programming Manual [upd] -
To help tailor more specific CNC programming content, please let me know:
Standard ISO/G-code support allows for traditional manual programming.
Do you need detailed explanations for like G76 threading?
The G71 cycle removes bulk material along the Z-axis, stepping down progressively in the X-axis. fanuc series oitf plus programming manual
The for this specific model is not a generic CNC book. It is the definitive technical document that details the exact syntax, modal commands, and cycle parameters required to communicate with the machine tool’s brain.
Reserve structural sequence numbers ( N100 , N200 ) specifically for canned profile definitions or tool changes. Numbering every single line decreases file scannability and wastes processing memory.
An important feature of the 0i‑TF Plus control is the optional software. This conversational programming interface allows operators to create part programs by filling in graphical forms rather than writing raw G‑code. The programming manual includes a section dedicated to Manual Guide i, covering its intuitive menus, modern graphical display, and how its animation features simplify complex programming steps. This function is particularly valuable for shops looking to reduce programming time on complex parts or for less experienced programmers. Manual Guide i can be used as a simplified CAD/CAM package, allowing programmers to use performance‑enhancing control features while keeping their machines operating. To help tailor more specific CNC programming content,
| | Document Number(s) | Primary Purpose | | :--- | :--- | :--- | | OPERATOR‘S MANUAL (Common to Lathe & Machining Center) | B-64694EN/01, B-64694CM/01 | General operation, safety precautions, and common functions | | CONNECTION MANUAL (Hardware) | B-64693EN/01 | Hardware setup and electrical connections | | PARAMETER MANUAL | B-64610EN/01 | Parameter settings and system configuration | | MAINTENANCE MANUAL | B-64695EN/01 | Troubleshooting and preventive maintenance | | Programming Guide (included within Operator’s Manual) | B-64604EN-1/01 (Lathe) / B-64604EN-2/01 (Machining Center) | Detailed programming commands and cycles |
Linear (G01), Circular (G02/G03), and Polar coordinate interpolation.
| Variable # | Type | Purpose | |------------|----------------|------------------------------| | #1–#33 | Local | Local to macro call | | #100–#199 | Common (#100) | Volatile, cleared at reset | | #500–#999 | Common (#500) | Non-volatile (saved at power-off) | | #1000+ | System | Read/write system data | The for this specific model is not a generic CNC book
Fanuc controls are "no-decimal-point" sensitive. If you type X10 , the control sees 0.0001 inches (or 0.001mm). You must type X10.0 . The manual contains a bold warning box on this exact error, which is a leading cause of scrapped parts.
G-codes dictate how the tool moves. They can be modal (remaining active until cancelled) or non-modal (active only in the block in which they are programmed). Here are the most common G-codes you will find in the programming manual:
| M-Code | Function | Description | | :--- | :--- | :--- | | | Program Stop | Stops the program execution until the operator presses the cycle start button. | | M01 | Optional Stop | Similar to M00, but the stop only occurs if the "Optional Stop" switch is activated on the operator panel. | | M02 | Program End | Ends the program, but does not rewind it. | | M03 | Spindle On (Forward) | Starts the spindle rotating clockwise (CW). | | M04 | Spindle On (Reverse) | Starts the spindle rotating counter-clockwise (CCW). | | M05 | Spindle Stop | Stops the spindle. | | M06 | Tool Change | Automatically executes a tool change sequence. | | M08 / M09 | Coolant On / Coolant Off | Turns the flood coolant on (M08) and off (M09). | | M30 | Program End & Rewind | Ends the program and returns the program pointer to the beginning. | | M98 | Subprogram Call | Calls a separate subprogram to be executed. | | M99 | Subprogram End | Returns from the subprogram back to the main calling program. |
(P975 = thread height 0.975mm, Q300 = 1st cut 0.3mm depth radius)