Patton Heater Model Poh2501 Manual
If the unit is knocked over, an internal switch will automatically cut the power. To reset, simply stand the unit upright. Overheat Protection:
Unplug the heater for 15 minutes, clear any grill obstructions, and restart. The desired thermostat temperature has been reached.
: Slide the caster brackets over the ends of the U-bolts.
This is normal during initial startup and will dissipate within 15 minutes. Dust on fan blade Clean vents with a vacuum or compressed air. Unit is on an uneven surface Move the heater to a stable, flat surface. patton heater model poh2501 manual
Understanding the technical limits of your appliance ensures safe and efficient operation. POH2501 Type: Utility Fan-Forced / Ceramic Heater Voltage: 120V AC, 60Hz
When winter rolls in and your central heating just isn’t cutting it, a reliable portable heater becomes a household hero. The is a popular, budget-friendly utility heater found in many garages, basements, and workshops. But do you know how to get the most out of it safely and efficiently?
Regularly check the power cord and plug for damage. If the plug feels hot to the touch during operation, discontinue use immediately; the wall outlet may be worn out and need replacement by an electrician. Operating Instructions If the unit is knocked over, an internal
Adjustable dial thermostat to automatically maintain your desired room temperature.
A built-in safety switch cuts power to the heating elements instantly if the unit is knocked over or tilted off its flat base. Resetting the Heater After an Overheat Shutdown
The is a portable, oil-filled radiator heater designed for efficient indoor heating. Operating at 120 Volts with a maximum output of 1500 Watts , it is suitable for rooms between 120 and 160 square feet . Quick Setup & Assembly The desired thermostat temperature has been reached
If you do not have the physical manual, follow these standard procedures for the POH2501:
Disclaimer: This article is for informational purposes only and is not a substitute for the official Patton Heater Model POH2501 Manual. Electrical installation should be performed by a licensed electrician.
Keep combustible materials (furniture, pillows, bedding, papers, clothes, and curtains) at least 3 feet (0.9 meters) from the front, sides, and rear of the heater.
This is common when turning the heater on for the first time in a season. Allow the heater to run in a well-ventilated area for 15 minutes to burn off the dust. If the smell persists, turn it off and inspect for blockages.
Understanding the electrical requirements of your Patton POH2501 is crucial for safe operation. POH2501 Voltage: 120V AC Frequency: 60 Hz Wattage Settings: Low (1000 Watts) / High (1500 Watts) Maximum Current: 12.5 Amps Heating Element: Fan-forced convection Housing Material: Heavy-gauge rugged steel Operating Instructions Setup and Placement