Check that the switch is pressed down on that specific channel strip. Verify that the Master faders are raised.
: 4 dedicated tape returns for multitrack recording monitoring. 2. Channel Strip Architecture
Routes the channel signal directly to the headphones and master meters to monitor individual inputs without affecting the main mix. Soundtracs Topaz 12 4 Manual
This is the #1 confusion point. Each channel has a switch labeled .
Do you have external (like compressors or reverbs) to patch in? Check that the switch is pressed down on
Insert a TRS insert cable into the channel's Insert jack. The "Tip" sends the raw signal to your compressor input, and the "Ring" returns the compressed signal back to the channel strip before the EQ section. 5. Maintenance, Troubleshooting, and Care
: Desktop analog console with an angled user interface for visibility. Each channel has a switch labeled
Connect to your stage monitor amplifier or wireless IEM transmitter.
Assign the channels you want to record to Group 1-2 or Group 3-4.
The service manual (if you find it) lists all capacitor values. A common community-sourced list: