Press to save the change. The text will stop flashing.
Standard factory setting is 3 to 5 minutes before the motor stops to prevent excessive motor starts per hour. 🚨 ES3000 Error Codes and Troubleshooting
Illuminates when the motor is running.
The control panel is divided into two primary display areas and several function buttons for ease of use. Shows the current compressor pressure . Bottom Display Shows temperature , total hours , and loaded hours . Reset Button
The ES3000 is a microprocessor-based control system designed to monitor and regulate rotary screw compressors. By constantly tracking operational data, it ensures the compressor delivers air strictly according to system demand, drastically reducing energy waste. Key Benefits Es3000 Compressor Controller Manual Pdf
Cause: The main motor is drawing excessive current, causing the thermal relay to trip.
Initiates and safely shuts down the machine.
The title was a lie, a relic of a hasty print job years ago. It wasn't just a manual; it was a Rosetta stone for a language Elias didn't speak.
Shows real-time pressure, temperature, and specific parameter values. Press to save the change
Enter the User or Service access code using the arrow keys and confirm with .
: Features an icon-based digital display that shows real-time pressure, oil temperature, and total/loaded running hours.
: These warn you to replace filters (oil, air, or separator) or change the oil.
To maximize efficiency, you can adjust the operational pressures and timers directly on the ES3000 panel. Setting the Pressure Setpoints 🚨 ES3000 Error Codes and Troubleshooting Illuminates when
The cursor blinked. Zero results found.
Press and hold the or Menu button to open the parameter access screen.
Every 2,000 hours (more frequently in dusty environments). Oil Separator Change: Every 4,000 hours. How to Reset Maintenance Timers
Flashes for warnings and stays solid for critical shutdowns. 2. Standard Operating Modes
Shows current operating pressure, temperature, and status messages (e.g., "Running," "Loaded," "Stopped"). Start Button (I): Initiates the start sequence. Stop Button (O): Initiates an orderly shutdown sequence.