Not natively. MPtools requires Windows. However, you can run it in:
Once complete, the slot will turn green and display OK or Pass . Your USB drive has been completely wiped, given fresh firmware, and reallocated healthy memory blocks. Troubleshooting Common MPTools Errors
Download a free hardware identification utility like or Flash Drive Information Extractor (Flash Drive Information) . Insert your corrupted USB drive into your PC. Launch the utility and locate your USB drive in the list. firstchip fc1178 fc1179 mptools v1052
| Source | Version | Notes | |--------|---------|-------| | USBDev.ru | v1.0.5.2 | Frequently referenced for SanDisk TLC recovery | | 52pojie.cn | v1.0.4.6 | Older but stable version | | Elektroda.com | v1.0.4.2 | Includes detailed changelog | | GitCode Blogs | 2021-10-24 | Community-archived release |
An older generation, highly versatile single-channel controller. It supports a wide variety of legacy 2D MLC and SLC NAND flash memory from manufacturers like Samsung, SanDisk, Toshiba, and Intel. Not natively
The Ghost in the Silicon: Why FirstChip MPTools v1052 Feels Like Digital Resurrection
MPTools stands for . Hardware manufacturers use this software in factories to format raw flash memory, link it to the controller, inject the USB device descriptors (Vendor ID, Product ID, Serial Number), and test for bad sectors. Your USB drive has been completely wiped, given
These tools are not intended for everyday users but are essential for repairing corrupted drives, restoring fake capacity drives to their true size, or converting a drive into specialized modes (e.g., USB-CDROM for bootable installations).
FirstChip is a Chinese manufacturer that produces cost-effective USB 3.0 controller chips widely used in budget and mid-range flash drives. The FC1178 and FC1179 are two of their common models, often found in white-label or generic-branded USB sticks. The core of this guide is the , a professional-grade utility that provides low-level access to these controllers.
The NAND flash memory may be completely degraded or physically damaged. Try increasing the ECC capability in the settings panel or switching the scan level to a deeper factory cycle.
There are many versions of MPTools (e.g., v1018, v1046, v1066, etc.).