The current software version and database date should be displayed. Troubleshooting Tips
The screen should remain , but the Power light will stay lit, indicating it is in Download Mode. 3. Flash the New Firmware Launch the Flash Loader program on your PC.
Once the progress bar reaches 100%, the software will display a "Success" or "Upgrade Complete" message.
Updating the software on the Satlink WS-6933 is a relatively straightforward process that can be completed in a few simple steps. First, users need to check the current software version on their device and compare it with the latest version available on the Satlink website or through the device's automatic update feature. If an update is available, users can download the new software version to a USB drive and then connect the drive to the WS-6933. The device will then automatically detect the update file and prompt the user to install it. The update process typically takes a few minutes to complete, during which time the device may restart several times. satlink ws-6933 software update
If you absolutely must proceed, follow the RS-232 method – it has the highest recovery chance if something goes wrong.
You will need to perform a recovery flash. Run the upgrade tool again, select the original factory firmware file, click download, and connect the USB cable while holding down the power button to force the chip into programming mode. Signal Loss After Update
The upgrade tools are executable (.exe) files designed for Windows (XP, 7, 8, 10, or 11). The current software version and database date should
is essential for maintaining an accurate transponder list and ensuring the device supports the latest satellite parameters. The process is typically handled via a PC connection using the unit's USB port. Before starting, ensure you have the following:
Use the keypad to update the Frequency, Symbol Rate, and Polarisation. Save the changes before exiting.
By using this manual editor, you can keep your meter's satellite data current without the hassle and risk of finding and applying a full software update. This is by far the safest and most reliable method for most users. Flash the New Firmware Launch the Flash Loader
In rare cases, you might encounter problems. Here’s how to address them:
A: Because the WS-6933 has multiple hardware variants, try contacting the distributor where you purchased the device. If you're in Europe, reaching out to the listed German support contact may yield the correct file.
Once you have the file and your device is ready, follow these instructions carefully: