: It is famous for its massive ensemble cast, including Sanjay Dutt, Ajay Devgn, Saif Ali Khan, Abhishek Bachchan, Sunil Shetty, and Akshaye Khanna, among many others.
during the 1999 Kargil War to reclaim territory from intruders across the Line of Control. Star-Studded Cast
The 1999 Kargil War remains a defining chapter in Indian military history, representing a test of grit and sacrifice in the treacherous heights of the Himalayas. Directed by J.P. Dutta, (2003) serves as a grand, star-studded cinematic tribute to the real-life heroes of the Indian Armed Forces who reclaimed occupied territories during Operation Vijay .
| Reason | Reality Check | |--------|----------------| | | “Free” comes at the price of legal risk and potential device infection. | | Lack of regional availability | If a legitimate platform does not offer the film in a user’s country, piracy becomes tempting. The solution lies in lobbying for wider licensing, not in illegal downloads. | | Convenience | Piracy sites often host multiple languages and subtitle options, but reputable streaming services now provide similar flexibility (e.g., multiple subtitle tracks on Amazon Prime). | loc kargil vegamovies
This article revisits the film’s artistic and historical significance, explores its reception over the years, and examines how audiences today can (and cannot) watch it—especially in the context of the rise of streaming platforms and sites like Vegamovies .
Director J. P. Dutta prioritized authenticity, using technical and material assistance from the Indian military. The production featured actual weapons used in the conflict, such as Bofors artillery guns and Indian Air Force SEPECAT Jaguars. Where to Watch While third-party sites like Vegamovies
If LOC: Kargil is the supply, Vegamovies is the black-market pipeline. Vegamovies is a pirate website that operates in a cat-and-mouse game with Indian authorities and ISPs. : It is famous for its massive ensemble
When users search for "LOC Kargil Vegamovies," they are navigating the complex world of online film distribution. Vegamovies is a well-known unauthorized torrent and streaming website that hosts copyrighted material without permission. Why Do People Use Piracy Sites?
The Indian Military provided actual troops, artillery, and authentic weapons for the shoot. The film was shot on location in Ladakh to replicate the harsh terrain.
The 2003 war film LOC: Kargil , directed by J.P. Dutta, remains one of the most ambitious project undertakings in Indian cinema history. With its massive star cast and a runtime spanning over four hours, the movie attempts to chronicle the biographical stories of Indian soldiers during the 1999 Kargil War. Over two decades after its theatrical release, the film continues to experience spikes in digital search traffic, often coupled with piracy-associated terms like "Vegamovies." Directed by J
The production team spared no effort in recreating the war scenarios, ensuring that the film's visual and auditory elements transported audiences to the battle-scarred landscapes of Kargil. From the intense combat sequences to the emotional moments of camaraderie and loss, LOC Kargil was crafted to resonate with viewers on multiple levels.
Piracy portals typically utilize deceptive user interfaces, redirection links, and pop-ups that degrade the viewing experience. Legal Alternatives for Streaming
The Indian Armed Forces launched to reclaim these positions. The film meticulously documents the grueling battles fought by various regiments to win back peaks like Tiger Hill and Tololing. Production and Cinematic Scale
akopalypse.net
rTorrent and configuration
Documentation on rtorrent is scarce and spread all
over the interwebs. Some options are self-explanatory, some are tricky,
and for some features there is not a hint on the man page.
This config lets you
· deal with seperate trackers
· keep the .torrent files in respective directories
· watch these directories for new torrents
· prefer encrypted connections
Probably there is no point in encrypted traffic, as it uses RC4 as
encryption algorithm, which is broken for years.
The numbers in like
schedule = tied_directory,5,15,start_tied=
mean task done for the first time 5 seconds after starting, then
every 15 seconds.
Basics
Control start / stopped state
^s – Start download item. Runs hash first unless already done.
^d – Stop an active download item, or remove a stopped one.
^k – Stop item and close all files, also set 'ignore commands' flag.
Global throttling
a|s|d – Increase the upload throttle by 1/5/50 KiB.
z|x|c – Decrease the upload throttle by 1/5/50 KiB.
A|S|D – Increase the download throttle by 1/5/50 KiB.
Z|X|C – Decrease the download throttle by 1/5/50 KiB.
Other general keys
‹up›|‹down› – Select an item.
‹left› – Go back to the previous screen.
^o – Set new download directory on a closed item.
^x – Open a prompt for rTorrent commands.
^q – Exit rTorrent (press twice to skip 'stop' tracker announces).
Errors & Warnings
A tracker returns a HTTP 5xx status page, or a similar HTML
response
Tracker: [Could not parse bencoded data]
When trying to load corrupt metafiles
Could not create download, the input is not a valid torrent
Data of an item is changed or removed, after it is marked as
complete;
recover by pressing Ctrl+kCtrl+eCtrl+r, then possibly Ctrl+s to re-download.
Download registered as completed, but hash check returned unfinished chunks.
Flow control
If you access rtorrent on another machine by screen, there are some
caveats with flow control. The remote terminal and rtorrent may use same
commands.
For rtorrent, Ctrl+s starts a torrent, and
Ctrl+q quits the application.
For the remote terminal, Ctrl+s is often used for terminal
control to stop screen output while Ctrl+q is used to start
it, so Ctrl+s instead of starting a torrent pauses flow,
therefore the session looks frozen.
You can check with
$ stty -a
To remove the mappings, change the terminal characteristics to
undefine the aforementioned special characters (i.e. stop and
start):
# stty stop undef
# stty start undef
Toggle off:
Ctrl+a Ctrl+f
should fix that for the moment.
To remove these mappings automatically at startup you may add the two
preceding commands to your e.g. ~/.bashrc file.
Scrolling through a huge amount of torrents is tedious, and one can
only scroll from one to the other without the ability to skip pages or
skip to the next first letter like jump to the next torrent
beginning with an H. But torrents can be filtered:
AltGr+End
opens the filter> prompt, and bar stre lists all
torrents containing Barbra Streisand in its name. Search is
case-insensitive. You can filter for regular expressions also, but using
RE may put some heavy load on the machine.
A new empty filtering ends the filtering.
Disable SSL verification
Usually you want a secured connection to the tracker to avoid MITM
attacks or your provider or other third party snooping your traffic. But
some trackers mess up their SSL renewal process from time to time. If
you consider your ratio more valueable than encrypted traffic, you might
add
network.http.ssl_verify_peer.set=0
to your config. Remember to comment it out if not needed anymore and
consider to reset your passkey. Furthermore, certificate checking can be
enabled or disabled for all trackers, not seperately for each
tracker.
A configuration template
# This is an example resource file for rTorrent. Copy to
# ~/.rtorrent.rc and enable/modify the options as needed.
# Uncomment the options you wish to enable.
#
# .rtorrent.rc for /path/to/data
pieces.sync.always_safe = yes
# Maximum and minimum number of peers to connect to per torrent.
# Many simultaneous up/ downloads and my old access point freaks out.
min_peers = 1
max_peers = 40
# Same as above but for seeding completed torrents (-1 = same as downloading)
min_peers_seed = 1
max_peers_seed = 40
# Maximum number of simultanious uploads per torrent.
max_uploads = 20
# Global upload and download rate in KiB. "0" for unlimited.
download_rate = 0
upload_rate = 0
# disable SSL verification. Do not uncomment unless you know what you're doing.
#network.http.ssl_verify_peer.set=0
# Default session directory. Make sure you don't run multiple instance
# of rtorrent using the same session directory. Perhaps using a
# relative path?
session = ~/rtorrentsession/
# Periodically save session data
schedule = session_save,500,120,session_save=
# Watch a directory for new torrents, save to corresponding folders and
# stop those that have been deleted.
schedule = watch_directory_1,30,90,"load.start=/path/to/data/abc/*.torrent,d.set_directory=/path/to/data/ABC/"
schedule = watch_directory_2,30,90,"load.start=/path/to/data/def/*.torrent,d.set_directory=/path/to/data/DEF/"
schedule = watch_directory_3,30,90,"load.start=/path/to/data/ghi/*.torrent,d.set_directory=/path/to/data/GHI/"
schedule = watch_directory_4,30,90,"load.start=/path/to/data/jkl/*.torrent,d.set_directory=/path/to/data/JKL/"
schedule = watch_directory_5,30,90,"load.start=/path/to/data/mno/*.torrent,d.set_directory=/path/to/data/MNO/"
schedule = watch_directory_6,30,90,"load.start=/path/to/data/pqr/*.torrent,d.set_directory=/path/to/data/PQR/"
# Restart torrents that have been copied back…
schedule = tied_directory,5,15,start_tied=
#… and stop those that have been deleted
schedule = untied_directory,5,15,close_untied=
# Close torrents when diskspace is low.
schedule = low_diskspace,5,60,close_low_diskspace=50G
# Stop torrents when reaching upload ratio in percent,
# when also reaching total upload in bytes, or when
# reaching final upload ratio in percent.
# example: stop at ratio 2.0 with at least 200 MB uploaded, or else ratio 20.0
#schedule = ratio,60,60,stop_on_ratio=200,200M,2000
# The ip address reported to the tracker.
# ip = 91.121.112.71
#ip = rakshasa.no
# The ip address the listening socket and outgoing connections is
# bound to.
#bind = 127.0.0.1
#bind = rakshasa.no
# Port range to use for listening.
port_range = 40000-59999
# Start opening ports at a random position within the port range.
port_random = yes
# Check hash for finished torrents. Might be usefull until the bug is
# fixed that causes lack of diskspace not to be properly reported.
check_hash = yes
# Set whetever the client should try to connect to UDP trackers.
use_udp_trackers = yes
# Alternative calls to bind and ip that should handle dynamic ip's.
#schedule = ip_tick,0,1800,ip=rakshasa
#schedule = bind_tick,0,1800,bind=rakshasa
# Encryption options, set to none (default) or any combination of the following:
# allow_incoming, try_outgoing, require, require_RC4, enable_retry, prefer_plaintext
#
# The example value allows incoming encrypted connections, starts unencrypted
# outgoing connections but retries with encryption if they fail, preferring
# plaintext to RC4 encryption after the encrypted handshake
#
encryption = allow_incoming,try_outgoing,enable_retry
#,prefer_plaintext
# Encryption options, set to none (default) or any combination of the following:
# allow_incoming, try_outgoing, require, require_RC4, enable_retry, prefer_plaintext
#
# The example value allows incoming encrypted connections, starts unencrypted
# outgoing connections but retries with encryption if they fail, preferring
# plaintext to RC4 encryption after the encrypted handshake
# Sort the main view by ratio
view.sort_current = main,greater=d.get_ratio=
view.sort_new = main,less=d.get_ratio=
view.sort = main
# Sort the seeding view by the upload rate and only show torrents with peers
view.sort_current = seeding,greater=d.get_up_rate=
view.filter = seeding,"and=d.get_complete=,d.get_peers_connected="
view.sort_new = seeding,less=d.get_up_rate=
view.sort = seeding
# Sort the leeching view by name
view.sort_current = leeching,greater=d.get_name=
view.sort_new = leeching,greater=d.get_name=
view.sort = leeching
# Filter the active view by connected peers
view.sort_current = active,less=d.get_name=
view.sort_new = leeching,less=d.get_name=
view.filter = active,d.get_peers_connected=
view.sort = active
#
# Do not modify the following parameters unless you know what you're doing.
#
# Hash read-ahead controls how many MB to request the kernel to read
# ahead. If the value is too low the disk may not be fully utilized,
# while if too high the kernel might not be able to keep the read
# pages in memory thus end up trashing.
#hash_read_ahead = 10
# Interval between attempts to check the hash, in milliseconds.
#hash_interval = 100
# Number of attempts to check the hash while using the mincore status,
# before forcing. Overworked systems might need lower values to get a
# decent hash checking rate.
#hash_max_tries = 10
# Max number of files to keep open simultaniously.
#max_open_files = 64
# Number of sockets to simultaneously keep open.
#max_open_sockets = <no default>
# Example of scheduling commands: Switch between two ip's every 5
# seconds.
#schedule = "ip_tick1,5,10,ip=torretta"
#schedule = "ip_tick2,10,10,ip=lampedusa"
# Remove a scheduled event.
#schedule_remove = "ip_tick1"
Documentation on rtorrent is scarce and spread all
over the interwebs. Some options are self-explanatory, some are tricky,
and for some features there is not a hint on the man page.
This config lets you
· deal with seperate trackers
· keep the .torrent files in respective directories
· watch these directories for new torrents
· prefer encrypted connections
Probably there is no point in encrypted traffic, as it uses RC4 as
encryption algorithm, which is broken for years.
The numbers in like
schedule = tied_directory,5,15,start_tied=
mean task done for the first time 5 seconds after starting, then
every 15 seconds.
Basics
Control start / stopped state
^s – Start download item. Runs hash first unless already done.
^d – Stop an active download item, or remove a stopped one.
^k – Stop item and close all files, also set 'ignore commands' flag.
Global throttling
a|s|d – Increase the upload throttle by 1/5/50 KiB.
z|x|c – Decrease the upload throttle by 1/5/50 KiB.
A|S|D – Increase the download throttle by 1/5/50 KiB.
Z|X|C – Decrease the download throttle by 1/5/50 KiB.
Other general keys
‹up›|‹down› – Select an item.
‹left› – Go back to the previous screen.
^o – Set new download directory on a closed item.
^x – Open a prompt for rTorrent commands.
^q – Exit rTorrent (press twice to skip 'stop' tracker announces).
Errors & Warnings
A tracker returns a HTTP 5xx status page, or a similar HTML
response
Tracker: [Could not parse bencoded data]
When trying to load corrupt metafiles
Could not create download, the input is not a valid torrent
Data of an item is changed or removed, after it is marked as
complete;
recover by pressing Ctrl+kCtrl+eCtrl+r, then possibly Ctrl+s to re-download.
Download registered as completed, but hash check returned unfinished chunks.
Flow control
If you access rtorrent on another machine by screen, there are some
caveats with flow control. The remote terminal and rtorrent may use same
commands.
For rtorrent, Ctrl+s starts a torrent, and
Ctrl+q quits the application.
For the remote terminal, Ctrl+s is often used for terminal
control to stop screen output while Ctrl+q is used to start
it, so Ctrl+s instead of starting a torrent pauses flow,
therefore the session looks frozen.
You can check with
$ stty -a
To remove the mappings, change the terminal characteristics to
undefine the aforementioned special characters (i.e. stop and
start):
# stty stop undef
# stty start undef
Toggle off:
Ctrl+a Ctrl+f
should fix that for the moment.
To remove these mappings automatically at startup you may add the two
preceding commands to your e.g. ~/.bashrc file.
Scrolling through a huge amount of torrents is tedious, and one can
only scroll from one to the other without the ability to skip pages or
skip to the next first letter like jump to the next torrent
beginning with an H. But torrents can be filtered:
AltGr+End
opens the filter> prompt, and bar stre lists all
torrents containing Barbra Streisand in its name. Search is
case-insensitive. You can filter for regular expressions also, but using
RE may put some heavy load on the machine.
A new empty filtering ends the filtering.
Disable SSL verification
Usually you want a secured connection to the tracker to avoid MITM
attacks or your provider or other third party snooping your traffic. But
some trackers mess up their SSL renewal process from time to time. If
you consider your ratio more valueable than encrypted traffic, you might
add
network.http.ssl_verify_peer.set=0
to your config. Remember to comment it out if not needed anymore and
consider to reset your passkey. Furthermore, certificate checking can be
enabled or disabled for all trackers, not seperately for each
tracker.
A configuration template
# This is an example resource file for rTorrent. Copy to
# ~/.rtorrent.rc and enable/modify the options as needed.
# Uncomment the options you wish to enable.
#
# .rtorrent.rc for /path/to/data
pieces.sync.always_safe = yes
# Maximum and minimum number of peers to connect to per torrent.
# Many simultaneous up/ downloads and my old access point freaks out.
min_peers = 1
max_peers = 40
# Same as above but for seeding completed torrents (-1 = same as downloading)
min_peers_seed = 1
max_peers_seed = 40
# Maximum number of simultanious uploads per torrent.
max_uploads = 20
# Global upload and download rate in KiB. "0" for unlimited.
download_rate = 0
upload_rate = 0
# disable SSL verification. Do not uncomment unless you know what you're doing.
#network.http.ssl_verify_peer.set=0
# Default session directory. Make sure you don't run multiple instance
# of rtorrent using the same session directory. Perhaps using a
# relative path?
session = ~/rtorrentsession/
# Periodically save session data
schedule = session_save,500,120,session_save=
# Watch a directory for new torrents, save to corresponding folders and
# stop those that have been deleted.
schedule = watch_directory_1,30,90,"load.start=/path/to/data/abc/*.torrent,d.set_directory=/path/to/data/ABC/"
schedule = watch_directory_2,30,90,"load.start=/path/to/data/def/*.torrent,d.set_directory=/path/to/data/DEF/"
schedule = watch_directory_3,30,90,"load.start=/path/to/data/ghi/*.torrent,d.set_directory=/path/to/data/GHI/"
schedule = watch_directory_4,30,90,"load.start=/path/to/data/jkl/*.torrent,d.set_directory=/path/to/data/JKL/"
schedule = watch_directory_5,30,90,"load.start=/path/to/data/mno/*.torrent,d.set_directory=/path/to/data/MNO/"
schedule = watch_directory_6,30,90,"load.start=/path/to/data/pqr/*.torrent,d.set_directory=/path/to/data/PQR/"
# Restart torrents that have been copied back…
schedule = tied_directory,5,15,start_tied=
#… and stop those that have been deleted
schedule = untied_directory,5,15,close_untied=
# Close torrents when diskspace is low.
schedule = low_diskspace,5,60,close_low_diskspace=50G
# Stop torrents when reaching upload ratio in percent,
# when also reaching total upload in bytes, or when
# reaching final upload ratio in percent.
# example: stop at ratio 2.0 with at least 200 MB uploaded, or else ratio 20.0
#schedule = ratio,60,60,stop_on_ratio=200,200M,2000
# The ip address reported to the tracker.
# ip = 91.121.112.71
#ip = rakshasa.no
# The ip address the listening socket and outgoing connections is
# bound to.
#bind = 127.0.0.1
#bind = rakshasa.no
# Port range to use for listening.
port_range = 40000-59999
# Start opening ports at a random position within the port range.
port_random = yes
# Check hash for finished torrents. Might be usefull until the bug is
# fixed that causes lack of diskspace not to be properly reported.
check_hash = yes
# Set whetever the client should try to connect to UDP trackers.
use_udp_trackers = yes
# Alternative calls to bind and ip that should handle dynamic ip's.
#schedule = ip_tick,0,1800,ip=rakshasa
#schedule = bind_tick,0,1800,bind=rakshasa
# Encryption options, set to none (default) or any combination of the following:
# allow_incoming, try_outgoing, require, require_RC4, enable_retry, prefer_plaintext
#
# The example value allows incoming encrypted connections, starts unencrypted
# outgoing connections but retries with encryption if they fail, preferring
# plaintext to RC4 encryption after the encrypted handshake
#
encryption = allow_incoming,try_outgoing,enable_retry
#,prefer_plaintext
# Encryption options, set to none (default) or any combination of the following:
# allow_incoming, try_outgoing, require, require_RC4, enable_retry, prefer_plaintext
#
# The example value allows incoming encrypted connections, starts unencrypted
# outgoing connections but retries with encryption if they fail, preferring
# plaintext to RC4 encryption after the encrypted handshake
# Sort the main view by ratio
view.sort_current = main,greater=d.get_ratio=
view.sort_new = main,less=d.get_ratio=
view.sort = main
# Sort the seeding view by the upload rate and only show torrents with peers
view.sort_current = seeding,greater=d.get_up_rate=
view.filter = seeding,"and=d.get_complete=,d.get_peers_connected="
view.sort_new = seeding,less=d.get_up_rate=
view.sort = seeding
# Sort the leeching view by name
view.sort_current = leeching,greater=d.get_name=
view.sort_new = leeching,greater=d.get_name=
view.sort = leeching
# Filter the active view by connected peers
view.sort_current = active,less=d.get_name=
view.sort_new = leeching,less=d.get_name=
view.filter = active,d.get_peers_connected=
view.sort = active
#
# Do not modify the following parameters unless you know what you're doing.
#
# Hash read-ahead controls how many MB to request the kernel to read
# ahead. If the value is too low the disk may not be fully utilized,
# while if too high the kernel might not be able to keep the read
# pages in memory thus end up trashing.
#hash_read_ahead = 10
# Interval between attempts to check the hash, in milliseconds.
#hash_interval = 100
# Number of attempts to check the hash while using the mincore status,
# before forcing. Overworked systems might need lower values to get a
# decent hash checking rate.
#hash_max_tries = 10
# Max number of files to keep open simultaniously.
#max_open_files = 64
# Number of sockets to simultaneously keep open.
#max_open_sockets = <no default>
# Example of scheduling commands: Switch between two ip's every 5
# seconds.
#schedule = "ip_tick1,5,10,ip=torretta"
#schedule = "ip_tick2,10,10,ip=lampedusa"
# Remove a scheduled event.
#schedule_remove = "ip_tick1"
Documentation on rtorrent is scarce and spread all
over the interwebs. Some options are self-explanatory, some are tricky,
and for some features there is not a hint on the man page.
This config lets you
· deal with seperate trackers
· keep the .torrent files in respective directories
· watch these directories for new torrents
· prefer encrypted connections
Probably there is no point in encrypted traffic, as it uses RC4 as
encryption algorithm, which is broken for years.
The numbers in like
schedule = tied_directory,5,15,start_tied=
mean task done for the first time 5 seconds after starting, then
every 15 seconds.
Basics
Control start / stopped state
^s – Start download item. Runs hash first unless already done.
^d – Stop an active download item, or remove a stopped one.
^k – Stop item and close all files, also set 'ignore commands' flag.
Global throttling
a|s|d – Increase the upload throttle by 1/5/50 KiB.
z|x|c – Decrease the upload throttle by 1/5/50 KiB.
A|S|D – Increase the download throttle by 1/5/50 KiB.
Z|X|C – Decrease the download throttle by 1/5/50 KiB.
Other general keys
‹up›|‹down› – Select an item.
‹left› – Go back to the previous screen.
^o – Set new download directory on a closed item.
^x – Open a prompt for rTorrent commands.
^q – Exit rTorrent (press twice to skip 'stop' tracker announces).
Errors & Warnings
A tracker returns a HTTP 5xx status page, or a similar HTML
response
Tracker: [Could not parse bencoded data]
When trying to load corrupt metafiles
Could not create download, the input is not a valid torrent
Data of an item is changed or removed, after it is marked as
complete;
recover by pressing Ctrl+kCtrl+eCtrl+r, then possibly Ctrl+s to re-download.
Download registered as completed, but hash check returned unfinished chunks.
Flow control
If you access rtorrent on another machine by screen, there are some
caveats with flow control. The remote terminal and rtorrent may use same
commands.
For rtorrent, Ctrl+s starts a torrent, and
Ctrl+q quits the application.
For the remote terminal, Ctrl+s is often used for terminal
control to stop screen output while Ctrl+q is used to start
it, so Ctrl+s instead of starting a torrent pauses flow,
therefore the session looks frozen.
You can check with
$ stty -a
To remove the mappings, change the terminal characteristics to
undefine the aforementioned special characters (i.e. stop and
start):
# stty stop undef
# stty start undef
Toggle off:
Ctrl+a Ctrl+f
should fix that for the moment.
To remove these mappings automatically at startup you may add the two
preceding commands to your e.g. ~/.bashrc file.
Scrolling through a huge amount of torrents is tedious, and one can
only scroll from one to the other without the ability to skip pages or
skip to the next first letter like jump to the next torrent
beginning with an H. But torrents can be filtered:
AltGr+End
opens the filter> prompt, and bar stre lists all
torrents containing Barbra Streisand in its name. Search is
case-insensitive. You can filter for regular expressions also, but using
RE may put some heavy load on the machine.
A new empty filtering ends the filtering.
Disable SSL verification
Usually you want a secured connection to the tracker to avoid MITM
attacks or your provider or other third party snooping your traffic. But
some trackers mess up their SSL renewal process from time to time. If
you consider your ratio more valueable than encrypted traffic, you might
add
network.http.ssl_verify_peer.set=0
to your config. Remember to comment it out if not needed anymore and
consider to reset your passkey. Furthermore, certificate checking can be
enabled or disabled for all trackers, not seperately for each
tracker.
A configuration template
# This is an example resource file for rTorrent. Copy to
# ~/.rtorrent.rc and enable/modify the options as needed.
# Uncomment the options you wish to enable.
#
# .rtorrent.rc for /path/to/data
pieces.sync.always_safe = yes
# Maximum and minimum number of peers to connect to per torrent.
# Many simultaneous up/ downloads and my old access point freaks out.
min_peers = 1
max_peers = 40
# Same as above but for seeding completed torrents (-1 = same as downloading)
min_peers_seed = 1
max_peers_seed = 40
# Maximum number of simultanious uploads per torrent.
max_uploads = 20
# Global upload and download rate in KiB. "0" for unlimited.
download_rate = 0
upload_rate = 0
# disable SSL verification. Do not uncomment unless you know what you're doing.
#network.http.ssl_verify_peer.set=0
# Default session directory. Make sure you don't run multiple instance
# of rtorrent using the same session directory. Perhaps using a
# relative path?
session = ~/rtorrentsession/
# Periodically save session data
schedule = session_save,500,120,session_save=
# Watch a directory for new torrents, save to corresponding folders and
# stop those that have been deleted.
schedule = watch_directory_1,30,90,"load.start=/path/to/data/abc/*.torrent,d.set_directory=/path/to/data/ABC/"
schedule = watch_directory_2,30,90,"load.start=/path/to/data/def/*.torrent,d.set_directory=/path/to/data/DEF/"
schedule = watch_directory_3,30,90,"load.start=/path/to/data/ghi/*.torrent,d.set_directory=/path/to/data/GHI/"
schedule = watch_directory_4,30,90,"load.start=/path/to/data/jkl/*.torrent,d.set_directory=/path/to/data/JKL/"
schedule = watch_directory_5,30,90,"load.start=/path/to/data/mno/*.torrent,d.set_directory=/path/to/data/MNO/"
schedule = watch_directory_6,30,90,"load.start=/path/to/data/pqr/*.torrent,d.set_directory=/path/to/data/PQR/"
# Restart torrents that have been copied back…
schedule = tied_directory,5,15,start_tied=
#… and stop those that have been deleted
schedule = untied_directory,5,15,close_untied=
# Close torrents when diskspace is low.
schedule = low_diskspace,5,60,close_low_diskspace=50G
# Stop torrents when reaching upload ratio in percent,
# when also reaching total upload in bytes, or when
# reaching final upload ratio in percent.
# example: stop at ratio 2.0 with at least 200 MB uploaded, or else ratio 20.0
#schedule = ratio,60,60,stop_on_ratio=200,200M,2000
# The ip address reported to the tracker.
# ip = 91.121.112.71
#ip = rakshasa.no
# The ip address the listening socket and outgoing connections is
# bound to.
#bind = 127.0.0.1
#bind = rakshasa.no
# Port range to use for listening.
port_range = 40000-59999
# Start opening ports at a random position within the port range.
port_random = yes
# Check hash for finished torrents. Might be usefull until the bug is
# fixed that causes lack of diskspace not to be properly reported.
check_hash = yes
# Set whetever the client should try to connect to UDP trackers.
use_udp_trackers = yes
# Alternative calls to bind and ip that should handle dynamic ip's.
#schedule = ip_tick,0,1800,ip=rakshasa
#schedule = bind_tick,0,1800,bind=rakshasa
# Encryption options, set to none (default) or any combination of the following:
# allow_incoming, try_outgoing, require, require_RC4, enable_retry, prefer_plaintext
#
# The example value allows incoming encrypted connections, starts unencrypted
# outgoing connections but retries with encryption if they fail, preferring
# plaintext to RC4 encryption after the encrypted handshake
#
encryption = allow_incoming,try_outgoing,enable_retry
#,prefer_plaintext
# Encryption options, set to none (default) or any combination of the following:
# allow_incoming, try_outgoing, require, require_RC4, enable_retry, prefer_plaintext
#
# The example value allows incoming encrypted connections, starts unencrypted
# outgoing connections but retries with encryption if they fail, preferring
# plaintext to RC4 encryption after the encrypted handshake
# Sort the main view by ratio
view.sort_current = main,greater=d.get_ratio=
view.sort_new = main,less=d.get_ratio=
view.sort = main
# Sort the seeding view by the upload rate and only show torrents with peers
view.sort_current = seeding,greater=d.get_up_rate=
view.filter = seeding,"and=d.get_complete=,d.get_peers_connected="
view.sort_new = seeding,less=d.get_up_rate=
view.sort = seeding
# Sort the leeching view by name
view.sort_current = leeching,greater=d.get_name=
view.sort_new = leeching,greater=d.get_name=
view.sort = leeching
# Filter the active view by connected peers
view.sort_current = active,less=d.get_name=
view.sort_new = leeching,less=d.get_name=
view.filter = active,d.get_peers_connected=
view.sort = active
#
# Do not modify the following parameters unless you know what you're doing.
#
# Hash read-ahead controls how many MB to request the kernel to read
# ahead. If the value is too low the disk may not be fully utilized,
# while if too high the kernel might not be able to keep the read
# pages in memory thus end up trashing.
#hash_read_ahead = 10
# Interval between attempts to check the hash, in milliseconds.
#hash_interval = 100
# Number of attempts to check the hash while using the mincore status,
# before forcing. Overworked systems might need lower values to get a
# decent hash checking rate.
#hash_max_tries = 10
# Max number of files to keep open simultaniously.
#max_open_files = 64
# Number of sockets to simultaneously keep open.
#max_open_sockets = <no default>
# Example of scheduling commands: Switch between two ip's every 5
# seconds.
#schedule = "ip_tick1,5,10,ip=torretta"
#schedule = "ip_tick2,10,10,ip=lampedusa"
# Remove a scheduled event.
#schedule_remove = "ip_tick1"
Documentation on rtorrent is scarce and spread all
over the interwebs. Some options are self-explanatory, some are tricky,
and for some features there is not a hint on the man page.
This config lets you
· deal with seperate trackers
· keep the .torrent files in respective directories
· watch these directories for new torrents
· prefer encrypted connections
Probably there is no point in encrypted traffic, as it uses RC4 as
encryption algorithm, which is broken for years.
The numbers in like
schedule = tied_directory,5,15,start_tied=
mean task done for the first time 5 seconds after starting, then
every 15 seconds.
Basics
Control start / stopped state
^s – Start download item. Runs hash first unless already done.
^d – Stop an active download item, or remove a stopped one.
^k – Stop item and close all files, also set 'ignore commands' flag.
Global throttling
a|s|d – Increase the upload throttle by 1/5/50 KiB.
z|x|c – Decrease the upload throttle by 1/5/50 KiB.
A|S|D – Increase the download throttle by 1/5/50 KiB.
Z|X|C – Decrease the download throttle by 1/5/50 KiB.
Other general keys
‹up›|‹down› – Select an item.
‹left› – Go back to the previous screen.
^o – Set new download directory on a closed item.
^x – Open a prompt for rTorrent commands.
^q – Exit rTorrent (press twice to skip 'stop' tracker announces).
Errors & Warnings
A tracker returns a HTTP 5xx status page, or a similar HTML
response
Tracker: [Could not parse bencoded data]
When trying to load corrupt metafiles
Could not create download, the input is not a valid torrent
Data of an item is changed or removed, after it is marked as
complete;
recover by pressing Ctrl+kCtrl+eCtrl+r, then possibly Ctrl+s to re-download.
Download registered as completed, but hash check returned unfinished chunks.
Flow control
If you access rtorrent on another machine by screen, there are some
caveats with flow control. The remote terminal and rtorrent may use same
commands.
For rtorrent, Ctrl+s starts a torrent, and
Ctrl+q quits the application.
For the remote terminal, Ctrl+s is often used for terminal
control to stop screen output while Ctrl+q is used to start
it, so Ctrl+s instead of starting a torrent pauses flow,
therefore the session looks frozen.
You can check with
$ stty -a
To remove the mappings, change the terminal characteristics to
undefine the aforementioned special characters (i.e. stop and
start):
# stty stop undef
# stty start undef
Toggle off:
Ctrl+a Ctrl+f
should fix that for the moment.
To remove these mappings automatically at startup you may add the two
preceding commands to your e.g. ~/.bashrc file.
Scrolling through a huge amount of torrents is tedious, and one can
only scroll from one to the other without the ability to skip pages or
skip to the next first letter like jump to the next torrent
beginning with an H. But torrents can be filtered:
AltGr+End
opens the filter> prompt, and bar stre lists all
torrents containing Barbra Streisand in its name. Search is
case-insensitive. You can filter for regular expressions also, but using
RE may put some heavy load on the machine.
A new empty filtering ends the filtering.
Disable SSL verification
Usually you want a secured connection to the tracker to avoid MITM
attacks or your provider or other third party snooping your traffic. But
some trackers mess up their SSL renewal process from time to time. If
you consider your ratio more valueable than encrypted traffic, you might
add
network.http.ssl_verify_peer.set=0
to your config. Remember to comment it out if not needed anymore and
consider to reset your passkey. Furthermore, certificate checking can be
enabled or disabled for all trackers, not seperately for each
tracker.
A configuration template
# This is an example resource file for rTorrent. Copy to
# ~/.rtorrent.rc and enable/modify the options as needed.
# Uncomment the options you wish to enable.
#
# .rtorrent.rc for /path/to/data
pieces.sync.always_safe = yes
# Maximum and minimum number of peers to connect to per torrent.
# Many simultaneous up/ downloads and my old access point freaks out.
min_peers = 1
max_peers = 40
# Same as above but for seeding completed torrents (-1 = same as downloading)
min_peers_seed = 1
max_peers_seed = 40
# Maximum number of simultanious uploads per torrent.
max_uploads = 20
# Global upload and download rate in KiB. "0" for unlimited.
download_rate = 0
upload_rate = 0
# disable SSL verification. Do not uncomment unless you know what you're doing.
#network.http.ssl_verify_peer.set=0
# Default session directory. Make sure you don't run multiple instance
# of rtorrent using the same session directory. Perhaps using a
# relative path?
session = ~/rtorrentsession/
# Periodically save session data
schedule = session_save,500,120,session_save=
# Watch a directory for new torrents, save to corresponding folders and
# stop those that have been deleted.
schedule = watch_directory_1,30,90,"load.start=/path/to/data/abc/*.torrent,d.set_directory=/path/to/data/ABC/"
schedule = watch_directory_2,30,90,"load.start=/path/to/data/def/*.torrent,d.set_directory=/path/to/data/DEF/"
schedule = watch_directory_3,30,90,"load.start=/path/to/data/ghi/*.torrent,d.set_directory=/path/to/data/GHI/"
schedule = watch_directory_4,30,90,"load.start=/path/to/data/jkl/*.torrent,d.set_directory=/path/to/data/JKL/"
schedule = watch_directory_5,30,90,"load.start=/path/to/data/mno/*.torrent,d.set_directory=/path/to/data/MNO/"
schedule = watch_directory_6,30,90,"load.start=/path/to/data/pqr/*.torrent,d.set_directory=/path/to/data/PQR/"
# Restart torrents that have been copied back…
schedule = tied_directory,5,15,start_tied=
#… and stop those that have been deleted
schedule = untied_directory,5,15,close_untied=
# Close torrents when diskspace is low.
schedule = low_diskspace,5,60,close_low_diskspace=50G
# Stop torrents when reaching upload ratio in percent,
# when also reaching total upload in bytes, or when
# reaching final upload ratio in percent.
# example: stop at ratio 2.0 with at least 200 MB uploaded, or else ratio 20.0
#schedule = ratio,60,60,stop_on_ratio=200,200M,2000
# The ip address reported to the tracker.
# ip = 91.121.112.71
#ip = rakshasa.no
# The ip address the listening socket and outgoing connections is
# bound to.
#bind = 127.0.0.1
#bind = rakshasa.no
# Port range to use for listening.
port_range = 40000-59999
# Start opening ports at a random position within the port range.
port_random = yes
# Check hash for finished torrents. Might be usefull until the bug is
# fixed that causes lack of diskspace not to be properly reported.
check_hash = yes
# Set whetever the client should try to connect to UDP trackers.
use_udp_trackers = yes
# Alternative calls to bind and ip that should handle dynamic ip's.
#schedule = ip_tick,0,1800,ip=rakshasa
#schedule = bind_tick,0,1800,bind=rakshasa
# Encryption options, set to none (default) or any combination of the following:
# allow_incoming, try_outgoing, require, require_RC4, enable_retry, prefer_plaintext
#
# The example value allows incoming encrypted connections, starts unencrypted
# outgoing connections but retries with encryption if they fail, preferring
# plaintext to RC4 encryption after the encrypted handshake
#
encryption = allow_incoming,try_outgoing,enable_retry
#,prefer_plaintext
# Encryption options, set to none (default) or any combination of the following:
# allow_incoming, try_outgoing, require, require_RC4, enable_retry, prefer_plaintext
#
# The example value allows incoming encrypted connections, starts unencrypted
# outgoing connections but retries with encryption if they fail, preferring
# plaintext to RC4 encryption after the encrypted handshake
# Sort the main view by ratio
view.sort_current = main,greater=d.get_ratio=
view.sort_new = main,less=d.get_ratio=
view.sort = main
# Sort the seeding view by the upload rate and only show torrents with peers
view.sort_current = seeding,greater=d.get_up_rate=
view.filter = seeding,"and=d.get_complete=,d.get_peers_connected="
view.sort_new = seeding,less=d.get_up_rate=
view.sort = seeding
# Sort the leeching view by name
view.sort_current = leeching,greater=d.get_name=
view.sort_new = leeching,greater=d.get_name=
view.sort = leeching
# Filter the active view by connected peers
view.sort_current = active,less=d.get_name=
view.sort_new = leeching,less=d.get_name=
view.filter = active,d.get_peers_connected=
view.sort = active
#
# Do not modify the following parameters unless you know what you're doing.
#
# Hash read-ahead controls how many MB to request the kernel to read
# ahead. If the value is too low the disk may not be fully utilized,
# while if too high the kernel might not be able to keep the read
# pages in memory thus end up trashing.
#hash_read_ahead = 10
# Interval between attempts to check the hash, in milliseconds.
#hash_interval = 100
# Number of attempts to check the hash while using the mincore status,
# before forcing. Overworked systems might need lower values to get a
# decent hash checking rate.
#hash_max_tries = 10
# Max number of files to keep open simultaniously.
#max_open_files = 64
# Number of sockets to simultaneously keep open.
#max_open_sockets = <no default>
# Example of scheduling commands: Switch between two ip's every 5
# seconds.
#schedule = "ip_tick1,5,10,ip=torretta"
#schedule = "ip_tick2,10,10,ip=lampedusa"
# Remove a scheduled event.
#schedule_remove = "ip_tick1"