This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
In many jurisdictions, tampering with or clearing crash data on a vehicle intended for public roads is strictly regulated or illegal. Some states and countries require mandatory module replacement after an airbag deployment to guarantee system integrity. Failing to disclose a cleared module during a vehicle sale can lead to severe liability. Modern and Safer Alternatives
Program the clean file back onto the ECU's memory chip and reinstall the module in the car. Technical Compatibility
To use Tachosoft Airbag Resetter V6.4, you will need the following hardware:
: Use your programmer to write the "clean" dump back onto the ECU's memory chip and reinstall the module in the vehicle. Key Considerations tachosoft airbag resetter v6.4
When a vehicle is involved in a crash that triggers the airbags or seatbelt pretensioners, the Supplemental Restraint System (SRS) computer logs an unerasable hard code known as crash data. This fault cannot be cleared using a standard OBD2 diagnostic scanner. TachoSoft Airbag Resetter v6.4 provides an automated, algorithm-based solution to overwrite those hard codes and restore the module to its factory-cleared state. ⚙️ Core Functions & How It Works
Requires an external EPROM or MCU programmer to read the physical chip (e.g., 95160, 68HC912D60) from the airbag module User Interface:
Locate the airbag control unit inside the vehicle, typically found under the center console or beneath the dashboard. Disconnect the vehicle battery, wait 15 minutes for the capacitors to discharge, and remove the module. Open the casing to locate the EEPROM or MCU chip (e.g., 95040, 95160, 95320, or Motorola HC11). Step 2: Reading the Chip Memory
Load the new "clear_dump.bin" file into your programmer software. Write the cleared data back onto the EEPROM chip. Resolder the chip to the circuit board if it was removed, reassemble the module housing, and reinstall it into the vehicle. Connect the battery and cycle the ignition to verify that the airbag light turns off after its initial self-check. Troubleshooting Common Errors This public link is valid for 7 days
Solder the chip back (if removed) and reinstall the module into the car to clear the airbag warning light Availability and Platforms Official/Commercial:
The Tachosoft Airbag Resetter V6.4 is a sophisticated device designed to reset airbag systems in various vehicles. Developed by Tachosoft, a renowned company in the automotive industry, this tool has become a go-to solution for mechanics, auto electricians, and car owners alike. The V6.4 version is the latest iteration, offering enhanced features and compatibility with a wide range of vehicles.
Limitations and Risks
: The software allows you to open a "dump" file (extracted from the ECU via an EPROM or MCU programmer), click a "clear crash" button, and save a repaired file to be written back to the chip. Can’t copy the link right now
: It works by modifying the "dump" file (the data read from the ECU's EEPROM or MCU) to remove the specific error codes and crash data generated during a collision. User-Friendly Interface
Bosch, Siemens, Delco, TRW, Autoliv, and Denso. Interface Language: English. How the Resetter Works (The Technical Process)
Automatically pinpoints the exact hex lines where crash data is stored and replaces them with clean values (FF or 00 structures).