Open your terminal emulator (PuTTY, TeraTerm, or SecureCRT). You should see the boot sequence scroll by.
Use a multimeter to test continuity between the chassis and known earth ground (resistance < 0.1 ohm).
tools system deploy-image /tmp/srlinux-24.10.1.bin reboot nokia 7250 ixr x1 installation guide
The Nokia 7250 Interconnect Router (IXR) X1 is a high-performance, high-density router designed for edge, aggregation, and data center networks. Proper physical installation ensures network reliability, optimal airflow, and hardware longevity. This guide provides step-by-step instructions for unboxing, mounting, powering, and initially configuring your Nokia 7250 IXR-X1. Pre-Installation Requirements and Safety
The Nokia 7250 IXR-X1 can be mounted into a standard four-post or two-post 19-inch rack. Attaching Mount Brackets to the Chassis Open your terminal emulator (PuTTY, TeraTerm, or SecureCRT)
Connect the power cords to the AC inlets on the PSU faceplates.
Tighten the captive screws by hand or with a screwdriver to prevent vibration during operation. 6. Cable Connections and Interface Population tools system deploy-image /tmp/srlinux-24
set / interface mgmt0 admin-state enable set / interface mgmt0 ipv4 address 192.168.1.100/24 set / interface mgmt0 ipv4 address 192.168.1.100 primary